BestCoat EP706

Epoxy coating, non-solvent, two components.

Advantages
  • Using at lower consumption. Shorten the tack-free time. Saving cost.
  • High strength, well bonding. Crack resistance and peeling resistance.
  • Abrasion and chemical resistance. Sustainability in corrosive environments.
  • High gloss, easy to clean, prevent the development of microorganisms, mold.
  • High coverage ability, easy to apply, saving material and labor.
  • Non-solvent, non-flammable, non-toxic. Friendly to environment.
  • Meet the requirement of the HACCP standard.




Download documents              
                                                            EN                   VN
  • BestCoat EP706 is an epoxy coating, non-solvent, with two components, use to protect industrial flooring surfaces or surfaces that required load bearing, abrasion resistance, and chemical resistance. 

BestCoat EP706 is applied to protect the following surfaces:

  • Industrial flooring or chemical warehouse, pharmaceutical factory, food or electric factory, a garage that needs heavy loading capacity.
  • Equipment or tank requires chemical resistance, anti-erosion, or needs to meet HACCP standards.
  • BestCoat EP706 is directly applied on the surface of metal, concrete, cement layer, fiber cement panel, epoxy mortar, wood... 
  • Using at lower consumption. Shorten the tack-free time. Saving cost.
  • High strength, well bonding. Crack resistance and peeling resistance.
  • Abrasion and chemical resistance. Sustainability in corrosive environments.
  • High gloss, easy to clean, prevent the development of microorganisms, mold.
  • High coverage ability, easy to apply, saving material and labor.
  • Non-solvent, non-flammable, non-toxic. Friendly to environment. 

Appearance/Color:

White, grey, green, yellow, brown (optional on requested)

Density:
Component A: 1.46 kg/liter @ 25oC;
Component B: 0.95 kg/liter @ 25oC.
Mixture A+B : 1.32 kg/liter @ 25oC.
Solid content:
100%
Application temperature:
Minimum: 20oC (above dew point temperature of 5oC)
Maximum: 35oC
Relative humidity ≤ 80%
Dose:
0.10 ÷ 0.20 kg/m2 /layer (depend on surface condition)
Mixing ratio:
Part A : Part B = 5:1 (by weight)
Chemical resistance:
Resistance to water, acid, alkali, seawater, grease, fuel and other common chemicals.
Mechanical strength:
High strength and mechanical abrasion resistance.
Thermal resistance: Dry heat: Up to 120oC
Damp heat: Up to 80oC

Preserve:

In cool, dry place (5oC ÷ 35 oC)

Shelf life:

12 months from manufacturing date in sealed package and stored in cool and dry place.

Packaging: 5 kg/set ; 25 kg/set.
Tack-free time: ≤ 6 hours (@25oC)

  Technical data: (samples after 07 days curing at 30oC)

Pencil hardness

≥ 3H

Impact strength

≥ 50 kG.cm2

Bonding strength

≥ 1.5MPa (concrete failed)

Abrasion resistance: CS10

≤ 65 mg

 

Environment temperature

+20oC

+25oC

+30oC

+35oC

Allowed time

90 (minutes)

75 (minutes)

60 (minutes)

40 (minutes)

Waiting time between layers: Minimum 

24hours

20 Hrs

16 Hrs

12 Hrs ​
Walk-ability: 30 hours 30 hours 24 hours 20 hours
Light mechanic impact resistance
5day 4day 3day 2day
Complete curing
10day 10day 7day 5day

 

Coating system:

  • To strongly absorb, easily breakable must be applied one primer layer by BestPrimer EP701, BestPrimer EP702, or BestPrimer EP703. To smooth the surface, solid and medium roughness does NOT apply to the primer layer. Should apply at least 2 layers of BestCoat EP706 after cleaning the surface.

Substrate requirement:

  • To concrete surface: Compressive strength:  ≥ 20 MPa, tensile strength: ≥ 1.5 MPa. The surface should be flat, solid, and dry (maximum moisture is 4%), and impurities, broken pieces, and dust should be removed. To metal surface: should be removed rust, oil or impurities...

Mixing:

  • A and B are mixed by slowly stirring (at speed of 300  ÷ 400 rpm). The minimum mixing time is 03 minutes and it is longer until reaching the required homogeneity. Take the mixtures for about 05 minutes then stir again before  application.

Application:

  • Use a brush or short roller or pressure sprayer to apply.

Note:

  • If applying the second layer and timeout of the previous layer over time then the maximum timeout should be roughened surface by mechanical methods.
  • Do not use mixtures over time to apply and get hardening.

Cleaning:

  • Use BestThinner SC-01 to clean equipment immediately after the execution and before the mixture’s hardening.

Safety:

  • Both components are nontoxic and nonflammable. However, part B is alkaline, and can be allergic to skin. Should wear a comforter, gloves, and protective glasses.
  • In case of accidental eye contact, wash with fresh water and seek medical advice immediately.