BestCoat EP609
Self-leveling Epoxy, High strength, Three components
Advantages:
-
Meet the standard of microbiological, food safety, pharmaceutical, GMP, HACCP.
-
Low viscosity, high self-leveling, easy to apply, high performance.
-
Resistance to chemical, mechanical abrasion, loading...
-
Well bonding to various material surfaces.
-
Easy to clean, wash, anti-microbial, anti- mold…
-
Friendly to environment.
Download documents
EN VN
-
BestCoat EP609 is a self-leveling epoxy, non-solvent, three components.
BestCoat EP609 is made from 100% pure epoxy, high strength and selected
silicate mineral and other special addictives.
BestCoat EP609 is used for high requirements such as:
- Resistance to high loading, chemical, corrosion, mechanic and meet the standard requirements of pharmaceutical safety, food, …as factory floors of pharmaceutical, seafood, food, assembly of electronic components, textiles, sterile room, operating room, laboratory, aircraft hangar, parking,…
- BestCoat EP609 can be directly applied on natural stone, grindstone, wood…
- Meet the standard of microbiological, food safety, pharmaceutical, GMP, HACCP.
- Low viscosity, high self-leveling, easy to apply, high performance.
- Resistance to chemical, mechanical abrasion, loading...
- Well bonding to various material surfaces.
- Easy to clean, wash, anti-microbial, anti- mold…
- Friendly to environment.
|
Color:
|
Yellow, Green, blue, grey, or as requested.
|
|
Density:
|
Part A: 1.17 kg/liter (@ 25oC) Part B: 0.98 kg/liter (@ 25oC) Part C: 2.60 kg/liter (@ 25oC) Mixed:1.85 kg/liter (@ 25oC) |
|
Solid content:
|
100% |
|
Consumption:
|
1.85 kg/m2
/mm thickness.
|
|
Application
temperature:
|
Minimum: 15oC (but above dew point temperature of 5oC)
Maximum: 35oC Relative humidity Max: 80% |
|
Chemical
resistance:
|
Resistance to alkali, acid, oil, grease….and other chemical solutions. |
| Mechanical strength : |
High loading capacity and mechanical abrasion resistance.
|
| Mixing ratio: |
A/B/C = 3/1/ 9 (by weight)
|
|
Preserve:
|
In cool, dry place |
|
Shelf - life : |
12 months from manufactured date |
| Packaging: |
20
kg/set; 40 kg/set.
|
Pot-life:
|
Ambient temperature
|
+20oC
|
+25oC
|
+30oC
|
+35oC |
|
Bonding strength
|
90 | 65 | 40 | 30 |
Curing times:
|
Ambient temperature
|
+20oC
|
+25oC
|
+30oC
|
+35oC |
| Walk-ability | 30 hours | 30 hours | 24 hours | 20 hours |
|
Light mechanical impacts
|
5 days
|
4 days
|
3 days
|
2 days
|
| Full cure | 10 days | 10 days | 7 days | 7 days |
Physical properties: (curing after 7 days @ 30
oC)
|
Compressie strength (MPa)
|
≥ 70
|
Bonding strength (MPa)
|
≥ 1.5 Concrete failure
|
|
Flexural strength (MPa)
|
≥ 35
|
Shore hardness D
|
≥ 70
|
|
Abraison resistant (mg)
(CS10/1000/1000)
|
≤ 70
|
Tensile strength (MPa)
|
≥ 25
|
Coating
system:
- One full coat of BestPrimer EP601, BestPrimer EP602 or BestPrimer EP603.
- One full coat of BestCoat EP609 with designed thickness.
Substrate
requirement:
-
Concrete floor: Compressive strength:
≥
20 MPa, Tensile strength:
≥
1.5
Mpa. The floor surface must be flat, steady and dry. The cracks, defects should
be completely treated. Impurities, broken pieces, dust, oil…should be removed
as required.
Mixing:
-
Mix part A and pour part B into Part A, then pour part C into mixtures (A+B). Use
an electric mixer or special blender at low speed (300÷400 rpm) to mix material
about 05 minutes or longer until material is homogeneous. If need to split
quantity of material, should stir part A before weight.
Application:
- Pour the mixed mixture onto the corresponding surface area to each parallel rows with width 200 ÷ 300 mm, using a jagged scraper to spread out materials according to the thicknes required. Using a notched roller to support the leveling and get rid of air bubbles.
- Note: While the mixture is not hardening, the application space should be no
dust, avoid insects.
Cleaning:
-
Use dry cloth and BestThinner SC01 to clean equipments immediately after the
execution and before the mixture’s hardening.
Safety:
-
BestCoat EP609 is non toxic, non flammable. However, should wear gloves,
masks and glasses while handling the product. In case of accidental eye
contact, wash with fresh water and seek medical advice immediately.