BestCoat EP708M

Self-leveling epoxy, elastic, two components

Good elasticity, suitable for cold rooms.
The ability to self-level and achieve high gloss.
Excellent chemical and mechanical resistance.
Meet microbiological, food and pharmaceutical safety standards
Increase the aesthetic level of the building.
Easy to clean, clean, resistant to microorganisms, mold..., easy to maintain, repair, patch...
Non-toxic, environmentally friendly.

BestCoat EP708M is a solvent-free, elastomeric, self-leveling, epoxy-based paint made of pure epoxy resin, mineral silicates, and specialized additives.
BestCoat EP708M after curing creates a coating that is resilient, flat, glossy, chemically resistant, abrasion resistant, and optimally loaded.

BestCoat EP708M is used to cover concrete or metal floors with high-end requirements such as:

Good elasticity, suitable for cold rooms.
The ability to self-level and achieve high gloss.
Excellent chemical and mechanical resistance.
Meet microbiological, food and pharmaceutical safety standards.
Increase the aesthetic level of the building.
Easy to clean, clean, resistant to microorganisms, mold..., easy to maintain, repair, patch...
Non-toxic, environmentally friendly

Appearance/Color:	Yellow, Green, Blue, Red brown, Grey, (optional on requested)
Solid content:	100 %
Density (25oC):	Part A: 1.62 ± 0.05 kg/L Part B: 0.96 ± 0.05 kg/L A+B mixed: 1.5 ± 0.05 kg/L @ 25oC (Depending on colored).
Consumption:	1.50 kg/m2 /mm thickness.
Working condition:	10oC (above dew point temperature of 5oC) ≤T ≤40oC. RH ≤ 80%
Mixing ratio:	See on the label.
Aggregate size:	Dmax :125 µm.
Flowability:	d ≥ 200 mm
Storage condition:	In cool, dry place (5oC ÷ 35 oC)
Shelf - life:	12 months from the date of manufacturing.
Packaging:	10 kg/set; 20kg/set; 40 kg/set. Or as requested.

Pot-life:

Ambient temperature	+20oC	+25oC	+30oC	+35oC
Pot-life (Minute)	50	35	25	20

Curing times:

Properties: (curing after 7 days @ 30oC)

Compressive strength (MPa) (min)	25	Flexural strength (MPa)	7.5
Bonding strength (MPa)	≥ 1.5	Withstand temperature	-40oC- 65oC
Shore hardness D (min)	60	Elongation (%)	≥ 4.

Chemical resistance: (weight percent gained after immersion @ 20 oC)

Time	H2O	10% NaCl	10% CH3COOH	10% H2SO4	10% NaOH	CH3OH
01 day	0.02	0.02	0.76	0.18	0.02	2.15
04 day	0.06	0.04	1.65	0.31	0.05	4.27
7 days	0.08	0.05	2.04	0.38	0.06	5.27

Thermal resistance:

Temperature	Time	Temperature	Time	Temperature	Time	Temperature	Time
+ 50oC	Long - life	+ 75oC	07 days	+ 100oC	12 hours	+ 150oC	01 hour

Coating flooring system:

01 primer layer of BestPrimer EP701, BestPrimer EP702 or BestPrimer EP703.
01 self-levelling layer of BestCoat EP708M with the thickness as design required.

Substrate requirement:

Required concrete surface: Compressive strength: ≥ 20 MPa, tensile strength: ≥ 1.5 MPa. The substrate surface must be flat, solid and dry. Cracks, defective positions must be treated, repaired, patched according to the correct procedure. Impurities, debris, dirt, grease must be completely removed. For metal, wood: Clean grease, rust, clean with BestThinner SC01.

Mixing:

Use an electric mixer or special blender at low speed (300÷400 rpm) to mix material about 5 minutes or longer until material is homogeneous. If need to split quantity of material, should stir part A before weight.

Application:

Pour the mixed mixture onto the corresponding surface area to each parallel rows with width 200 ÷ 300 mm, using a jagged scraper to spread out materials according to the thicknes required. Using a notched roller to support the leveling and get rid of air bubbles.
Note: While the mixture is not hardening, the application space should be no dust, avoid insects

Cleaning:

Health and Safety:

Product is non toxic, non flammable. Can be allergic to skin. It is advised to wear comforter, gloves, protective glasses. In case of accidental eye contact, wash with fresh water and seek medical advice immediately.