BestCoat EP709
Self-leveling Epoxy, High strength, Three components.
Advantages:
-
Meet the standard of microbiological, food safety, pharmaceutical, GMP, HACCP.
-
Low viscosity, high self-leveling, easy to apply, high performance.
-
Lower thickness. High mechanical properties..
-
Resistance to chemical, mechanical abrasion, loading.
-
Well bonding to various material surfaces.
-
Easy to clean, wash, anti-microbial, anti- mold.Friendly to environment.
Download documents
EN VN
BestCoat EP709 is a self-leveling epoxy, non-solvent, three components.
BestCoat EP709 is made from 100% epoxy, and selected silicate mineral and special additives..
-
BestCoat EP709 is used for extremely high requirements such as: Resistance to high loading, chemical, corrosion, mechanic and meet the standard requirements of pharmaceutical safety, food,... as factory floors of pharmaceutical, seafood,food, assembly of electronic components, textiles, sterile room, operating room, laboratory, aircraft hangar, parking,...
- BestCoat EP709 can be directly applied on natural stone, grindstone, wood...
-
Meet the standard of microbiological, food safety, pharmaceutical, GMP, HACCP.
- Low viscosity, high self-leveling, easy to apply, high performance.
- Lower thickness. High mechanical properties.
- Resistance to chemical, mechanical abrasion, loading.
- Well bonding to various material surfaces.
- Easy to clean, wash, anti-microbial, anti- mold. Friendly to environment.
Pot-life:
|
Ambient temperature
|
+20oC
|
+25oC
|
+30oC
|
+35oC |
|
Pot-life (Minute)
|
90 |
65 |
40 |
30 |
Curing times:
|
Ambient temperature
|
+20oC
|
+25oC
|
+30oC
|
+35oC |
|
Walkable (Hr)
|
30
|
30
|
24
|
20
|
| Light mechanical impact | 5 | 4 | 3 | 2 |
|
Completely cured
|
10 |
10
|
7
|
7
|
Physical properties: (curing after 7 days @ 30oC)
|
Compressive strength (MPa)
|
≥ 80
|
Flexural strength (MPa)
|
≥ 1.5 Concrete failure
|
|
Flexural strength (MPa)
|
≥ 40
|
Shore hardness D
|
≥ 80
|
|
Abraison resistant (mg)
(CS10/1000/1000)
|
≤ 65
|
Elongation (%)
|
≥ 0.1
|
Coating system:
- Primer coat of BestPrimer EP701, BestPrimer EP702 or BestPrimer EP703.
Top coat of BestCoat EP709 with designed thickness.
Substrate requirement:
- Concrete floor: Compressive strength:
≥
20 MPa, Tensile strength:
≥
1.5 Mpa. The floor surface must be flat, steady and dry and clean. The cracks, defects should be completely treated.
Mixing
- Firstly, mixing part A and part B, and continute mixing with part C by an electric mixer or special blender at low speed (300÷400 rpm) about 05 minutes or longer until material is homogeneous. If need to split quantity of material, should stir part A before weight.
Application:
- Pour the mixed mixture onto the corresponding surface area to each parallel rows with width 200 ÷ 300 mm, using a jagged scraper to spread out materials according to the thicknes required. Using a notched roller to support the leveling
and get rid of air bubbles.
Note:
- While the mixture is not hardening, the application space should be no dust, avoid insects.
Cleaning:
- Use dry cloth and BestThinner SC01 to clean equipments immediately after the execution and before the mixture’s hardening.
Safety:
- BestCoat EP709 is non toxic, non flammable. However, should wear gloves, masks and glasses while handling the product. In case of accidental eye contact, wash with fresh water and seek medical advice immediately.