BestSeal AC402

Waterproofing and sealing compound, polymer-silicate based, two components

 Advantages:

  • Good hardness, well-adhesive, resistant to cracking.
  • Quickly dry, limit the risk due to weather.
  • No crack or blister while thermal changement happens.
  • Bonding well to substrate based on silicate.
  • Well waterproofing, abrasion resistant, long durability.
  • Easy to apply, and maintain 
  • Shorten the application process, saving time, saving labor
  • Non-toxic, friendly to the environment
  • Do not cause polluted water when contacting directly
Download documents            

                                               EN             VN

  • BestSeal AC402 is a waterproofing, sealing membrane, two-components. After mixing, it becomes a composite silicate compound having hardness, toughness, and maximum adhesion, especially non-aging.
  • BestSeal AC402 has the ability of linking and adhesion with all silicate substrates such as brick surface, plaster mortar, concrete ... 
  • Applicable to waterproofing surrounding walls, eaves, flat-proof, restroom floor, swimming pool, water tank, ... 
  • Good hardness, well-adhesive, resistant to cracking.
  • Quickly dry, limit the risk due to weather.
  • No crack or blister while thermal Changement happens.
  • Bonding well to substrate based on silicate.
  • Well waterproofing, abrasion resistant, long durability.
  • Easy to apply, and maintain.
  • Shorten the application process, saving time, saving labor.
  •  Non-toxic, friendly to the environment.
  • Do not cause polluted water when contacting directly.


Appearance/Color:

Component A: Milky white liquid

Component B: Light grey/dry powder

Mixture A+B: Thickened liquid

Volume mass: Component A: 1.02 kg/liter
Component B: 1.20 kg/liter

Density (25oC):

Component A: 1.02  0.01 kg/L

Component B: 2.88  0.02 kg/L

Mixture A+B: 2.10  0.05 kg/L.

Consumption: ​

Min.: 1.0 kg/m2 /layer /1 mm

Max.: 2.0 kg/m2 /layer /1 mm.

Application temperature:
Minimum : + 10oC
Maximum: + 35oC
Chemical resistance: ​
Resistant to water, alkaline solution, grease, and fuel.
Mechanical strength:
Abrasion resistant, anti-cracking, high bonding strength, no peeling.
Bonding strength
≥ 1.0 N/mm2 ( at 28days on concrete, meet the requirement of ASTM D7234).
Mixing ratio:
Part A : Part B = 1 : 4 (By weight).

Preserve:

In A cool, dry place

Shelf life:

12 months upon manufacturing date

Packaging:
20kg/set or 25kg/set


Surface preparation: 

  • The surface should be structurally clean, with no cracks, oil-free, and no grease or any other contaminant. All unadhesive layers should be removed and properly treated before applying BestSeal AC402.
  • With the width of the crack ≥ 5mm, it requires to be perforated at least 10mm in width, and a minimum depth ≥ 1.5 times the width of the trench. The cut groove is U-shaped. With the water leaking surface, it requires widening the hole with a depth ≥ 1.5 times the diameter and filling by BestSeal CE201 at the water leaking place before application with BestSeal AC402.

Mixing: 

  • Components A and B should be properly mixed under the right ratio by slowly stirring (at speed of 300 ¸ 400 rpm). The minimum mixing time is ≥ 5 minutes or longer until having the best mixture as required. To achieve an identical mixture and no clumping, A is added only into a minimum 15 liters pail, mixing and pouring slowly B into, mixing until achieving the identical admixture. In the case of using it as a repaired mortar, the mixing ratio of A is about 18 ÷ 20% to B (by weight) to get the best mixture.

Application 

    Use a hard brush or short hair roller to coat the ready mixed admixture on the surface one by one layer (maximum thickness: 1mm). Apply the next layer after the first layer is totally dry (approx.01÷02 hours, depending on heat, weather, and windy condition). In the case of repair, use component A for the first layer, then apply the mixture by trowel after the first layer drying. In sunny and windy weather, it should be strictly obeyed the curing and humid condition of the surface when materials start hardening. Application time is 45 minutes since mixing time.

Attention: 

  • Moisten the surface but do NOT let puddles appear.
  • Minimum 2 layers of BestSeal AC402 are highly recommended.
  • The second coat should be applied at right angles to the direction of the first coat.  
  • Do NOT use expired and hardening material.
  • DO NOT add other material into BestSeal AC402.

Cleaning 

  • Clean tools and equipment immediately after applying. In the case of hardening, use the right mechanical methods to clean tools

  Health and safety: 

  • The product is harmless and non-flammable. Protective clothing is needed.