BestTile CE075

Tile adhesive, modified cement-polymer based, one component

Advantages:
  • High plasticity, high adhesion, application and adjustment time is long, easy to apply, saving material and labor.
  • The higher waterproof than traditional mortar because the component contains special additives.
  • Ready mixed, one component, regularly quantitative of components should be easy to use, avoid risks in the process of preparation on site
  • The strength develops fast and highly, put into use early.
  • Improve the aesthetic of construction parts.
  • Non-toxic, can be used for domestic water tanks.
  • Does not contain chloride corrosion of reinforcement.
  • Suitable climatic conditions in Vietnam.
Download documents                  
                                                         EN                VN
  • BestTile CE075 is a tile adhesive that is modified cement-polymer based, ready-mixed, one component. Just mix with water to use.
  • BestTile CE075 is made of special cement, selected siliceous aggregate and special additives, polymer modified.
  • Sticking floor tiles, floors, terraces, swimming pools, ... 
  • Paste ceramic wall tiles of all kinds of vertical walls, inclined walls... 
  • Paste decorative bricks, antique imitation concrete bricks… 
  • Sticking roof tiles, and decorative tiles in special cases.
  • Sticking mineral fiber panels for sound and heat insulation purposes...
  • BestTile CE075 white color can replace grout/sealer suitable for many tile colors.
  • High plasticity, high adhesion, application and adjustment time is long, easy to apply, saving material and labor
  • The higher waterproof than traditional mortar because the component contains special additives.
  • Ready mixed, one component, regularly quantitative of components should be easy to use, avoid risks in the process of preparation on site.
  • The strength develops fast and highly, put into use early.
  • Improve the aesthetic of construction parts.
  • Non-toxic, can be used for domestic water tanks.
  • Does not contain chloride corrosion of reinforcement.
  • Suitable climatic conditions in Vietnam.


Supply forms:
Dry powder. Grey, other colors upon request.

Density:

 Dry powder: 2.60  ± 0.02 kg/liter.

Wet powder: 1.80  ± 0.02 kg/liter.

Consumption:

  Average: 1.65 kg dry powder/1m2 /1mm.

Water ratio:
  20  ÷ 22 % compared with powder weight.

Compressive strength:

≥ 7.5 MPa.

Bonding strength: ~ 1.0 MPa.

Packaging:

25 kg/bag. ​

Storage condition:

  Unopened bag, moisture resistance, take a dry and cool place.

Shelf life:
12 months comply in storage condition.

 Substrate preparation:

  • The surface should be cleaned as required, and dirt, moss, and mold,…to be completely removed by appreciative means. In particular, if the surface is contaminated with oil or grease,… be thoroughly treated before applying BestTile CE075. Should wet the surface before applying for at least 05 minutes.

Mixing: 

  • Use a clean basket with appropriate capacity, pour the mixing water before, a stirring speed of 300 ÷ 400rpm, and continue to slowly pour slowly BestTile CE075 mixing until homogenous. Mixing time is normally about 05 minutes. However, depending on the specific conditions determine the appropriate mixing time to ensure homogenous mixtures, without lumps.

Application:

  • Use an iron brush or plastic with an appropriate sawtooth to apply compound BestTile CE075 on the surface. The tile work is carried out bottom-up and horizontal application. Use a rubber hammer and other tools to edit the appropriate location of bricks as desired. The time allowed for application and editing can be extended to 30 minutes by mixing BestTile CE075 with water. However, this depends on the environmental condition of temperature, wet surface condition,….
  • Note: 
  • The application time and editing are not over 60 minutes from mixing. 
  • Do not add any other materials into BestTile CE075 when using(except mixing water). 
  • Do not use material over time for application.

Cleaning:

  • Clean tools and equipment after application and before the mixture is set. 

Health and Safety: 

  • BestTile CE075 is non-toxic. However, could make an allergy to sensitive skin. Do not contact it for a long time. Should wear labor protection when applicable.
  • Avoid contacting directly food, and instruments of live activity, and keep out of the reach of children.
  • In case of accidental eye contact, wash with fresh water and seek medical advice immediately.