BestTile CE150

Tile adhesive, Improved the cement-polymer orginal, one component.

High plasticity, high adhesion, application and modification time is long, easy to apply, saving material and labor.
The higher waterproof than traditional mortar because the component contains special additives.
Ready mixed, one component, regularly quantitative of components should be easy to use, avoid risks in the process of preparation on site.
The strength develops fast and highly, put into use early.
Improve the aesthetic value of the project.
Non-toxic, can be used for domestic water tanks.
Does not contain chloride corrosion of reinforcement.
Suitable climatic conditions in Vietnam.

BestTile CE150 is tile adhesive, improved the cement-polymer original, ready mixed, one component. Just mix with water to use.
BestTile CE150 is made of special cement, selected siliceous aggregate and special additives, and polymer modified.

High plasticity, high adhesion, application and modification time is long, easy to apply, saving material and labor.
The higher waterproof than traditional mortar because the component contains special additives.
Ready mixed, one component, regularly quantitative of components should be easy to use, avoid risks in the process of preparation on site.
The strength develops fast and highly, put into use early.
Improve the aesthetic value of the project.
Non-toxic, can be used for domestic water tanks.
Does not contain chloride corrosion of reinforcement.
Suitable climatic conditions in Vietnam.

Existence form:	Dry powde.
Color:	Grey, other colors upon request.
Compressive strength:	≥ 15 MPa
Bonding strength:	≥ 1.0 MPa.
Density:	Dry powder: 2.60 ± 0.02 kg/liter. Wet : 1.80 ± 0.02 kg/liter .
Water ratio:	20 ÷ 22 % compared with powder weight.
Consumption:	Average: 1.65 kg dry powder/1m2 /1mm.
Holding conditions:	Unopened bag, moisture resistance, take a dry and cool place. .
Shelf life:	At least 12 months from the date of manufacture.
Package:	25 kg/bag

Substrate preparation:

The surface should be cleaned as required, dirt, moss, and mold,…to be completely removed by appreciative means. In particular, if the surface is contaminated with oil, or grease,… be thoroughly treated before applying BestTile CE150. Should wet the surface before applying for at least 05 minutes.

Mixing:

Use a clean basket with appropriate capacity, pour the mixing water before, the stirring speed 300 ÷ 400 circles/mins, run and continue to pour slowly BestTile CE150 mixing until homogenous. Mixing time is normally about 05 minutes. However, depending on the specific conditions to determine the appropriate mixing time to ensure homogenous mixtures, without lumps.

Application:

Use an iron brush or plastic with an appropriate sawtooth to apply compound BestTile CE150 on the surface. The tile work is carried bottom-up and horizontal application. Use a rubber hammer and other tools to edit the appropriate location of bricks as desired.
The time allowed for application and editing can be extended to 30 minutes from mixing BestTile CE150 with water. However, this depends on the environmental condition of temperature, wet surface condition,…

Note:

The application time and editing are not over 60 minutes from mixing.
Do not add any other materials into BestTile CE150 when using (except mixing water).
Do not use material is overtime for application.

Cleaning:

Safety:

BestTile CE150 is non-toxic. However, could make an allergy to sensitive skin. Do not contact it a long time. Should wear labor protection when application. Avoid contacting directly food, instruments of live activity, and keep out of the reach of children. In case of accidental eye contact, wash with fresh water and seek medical advice immediately.