BestCoat EP605

Solvent Based Epoxy Coating, Two Components

Advantages:
  • Well adhesive with the most high moisture surface( relative humidity 8%). 
  • Resistance to chemical, carbonate, and mechanical abrasion.
  • Develop strength quickly, and put the project into use soon.
  • High coverage, saving, and economical.
  • Washable, cleanable, microbe resistance, mold resistance 
  • Friendly to the environment, non-toxic 
  • Especially, non-polluted water 
  • Easy to apply by tools such as brush, short roller, pressure sprayer,… 
  • Easy to recognize signs of the end times to allow construction.




Download documents           
                                                   EN               VN
  • BestCoat EP605 is an epoxy coating, two components, dispersal water, used to coat for floor, slab, wall, ceiling, swimming pool, water tank,…
  • To make a coating protector on surface with functions as: abrasion resistance, water-proofing, chemical resistance, medium and light loading for factory floor, garage, workshop,…BestCoat EP605 can be directly coated on concrete surface, cement layer, cement fiber panel, epoxy mortar, metal surface,…
  • Well adhesive with the most high moisture surface( relative humidity 8%).
  • Resistance to chemical, carbonate, and mechanical abrasion.
  • Develop strength quickly, and put the project into use soon.
  • High coverage, saving, and economical. 
  • Washable, cleanable, microbe resistance, mold resistance.
  • Friendly to the environment, non-toxic.
  • Especially, non-polluted water.
  • Easy to apply by tools such as brush, short roller, pressure sprayer,… 
  • Easy to recognize signs of the end times to allow construction.

Appearance / Color:

White, grey, green, yellow, brown (optional on requested)

Density:
Component A: 1.05 ± 0.02 kg/litter (@ 25oC)
Component B: 1.39 ± 0.02 kg/litter (@ 25oC)
Mixture A+B: 1.33 ± 0.02 kg/litter (@ 25oC)
Solid content:
≥ 70 %
VOC content: ≤ 30%

Dose:

0.10 ÷ 0.25 kg/m2 /layer (depend on surface condition)

Application temperature:
Minimum: 20oC (above dew point temperature of 5oC)
Maximum: 35oC
Relative humidity ≤ 80%
Chemical resistance:
Resistance to water, light acid, light alkali, sea-water, grease, fuel and other common chemicals.
Mechanical strength : Improving the mechanical abrasion resistance for surface.
Mixing ratio: Part A : Part B = 1:4 (by weight)

Preserve:

In cool, dry place

Shelf - life :

12 months from manufactured date

Packaging: 5 kg/set; 25 kg/set.

Pot-life: ​

Environment temperature
+20oC
+25oC
+30oC
+35oC
Allowed time
90 mins
65 mins
50 mins
40 mins

Waiting time:

Environment temperature
+20oC
+25oC
+30oC
+35oC
Waiting time       Minimum
24 Hrs
18 Hrs
12 Hrs
8 Hrs
                             Maximum No limited
No limited
No limited
No limited
Walkable
24 hours 18 hours 12 hours 8 hours
Light loading capacity 2 days 2 days 1.5days 1 days
Complete curing 7 days 7 days 7 days 7 days


Coating system:

         To defect and honeycomb surfaces should be treated by the epoxy mortar of BestBond products before applying BestCoat EP605. To smooth the           surface, solid and medium roughness can be applied as follows: 

  • 01 primer layer: BestPrimer EP602 with rate: 0.20 ÷ 0.25 kg/m2 
  • 02 coating layers: BestCoat EP605 with rate: 0.20 ÷ 0.25 kg/m2 

         However, the layer can be applied more depending on the request of each item, work or purpose.

Conditional surface:

  • Application surface should be met the minimum strength (Compressive strength: ≥  20 MPa, Tensile strength:  ≥  1.5 MPa). The surface should be locked water-permeable and removed dirty particles, dusty before application.

Mixing:

  • Before application, two components A and B should be properly mixed under the right ratio by slowly stirring (at speed of 300 ÷ 400 rpm).
  • The minimum mixing duration should not be less than 05 minutes and can be longer until reaching the required homogeneity. Take the mixtures for about 05 minutes then stir again before application.

Application:

  • Use a brush or short roller or pressure sprayer to apply with rate not over 0.40 kg/m2 in any case. The application area should be peaceful, clean, no dust.
  • Note: Do not use mixtures over time to apply and get hardening.

Cleaning:

  • Use water and soap to clean equipment immediately after the execution and before the mixture’s hardening.

Safety:

  • Both components are nontoxic and nonflammable. However, one should wear a comforter, gloves, and protective glasses while handling the product.
  • In case of accidental eye contact, wash with fresh water and seek medical advice immediately.